![]() Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, ESP32-S3-WROOM-1U, or ESP32-S3-WROOM-2, a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. Implementation of resistor or CC communication on pin A5 is required.This user guide will help you get started with ESP32-S3-DevKitC-1 and will also provide more in-depth information. The USB Type-C Power-Only plug is a depopulated version of the USB Full-Featured Type-C plug or the USB 2.0 Type-C plug. Contacts for configuration channel, Vbus, and GND (i.e., A1, A4, A5, A9, A12, B1, B4, B9, and B12) shall be present, others are optional. These USB-C cables only support 2.0 speeds and do not support alternate modes. USB-C cables that do not have shielded SuperSpeed pairs, sideband use pins, or additional wires for power lines can have increased cable length, up to 4 m. The plug orientation determines which pair is active. The receptacle side shall support the USB 2.0 differential pair present on Dp1/Dn1 or Dp2/Dn2. ![]() Shall be terminated as defined in the applicable specification for the cable typeĬontacts B6 and B7 should not be present in the USB Type-C plug. USB differential pair, position 1, negative ![]() USB differential pair, position 1, positive Optional power supply for active cables schemes Pin shall be connected to GND through a resistor 5.1 kΩ USB 2.0 micro-B to USB-C cable pinout USB-C signal DescriptionĬonfiguration channel. Micro-USB 2.0 to USB-C is a USB2.0-only version of USB-C Full-Featured cable. USB Type-C specification defines a small reversible-plug connector for USB devices.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |